Studio D Operations Manual
© Oxygen College 22407
V2 – 01/20 Page | 5
Basic Operation
This unit is setup to provide individual headphone sends to the performers in the live space of
Studio D. This is achieved by using the mono auxiliary send outputs from the ZED-R16 which
are patched directly into the back of the headphone amp. You will require the following
settings to operate the unit correctly:
•
Balance control turned
FULLY
to the right (Aux setting).
•
Mono L engaged in the mono control section.
•
Patch cable from the rear of the headphone output connected to the appropriate
headphone send in the patch bay (shown in photo below).
•
Only headphone amps 1-3 are connected.
Individual Bass &
Treble Control
Individual channel
volume
Balance
between Main
& Aux signal
Overall unit
volume
Mono
Control
Headphone
output
Headphones need to be patched
into the corresponding return in the
patch bay, which will take the signal
through to the live space.
