oxycom CABIN 400, Руководство по эксплуатации

Страница: 13 / 30

Application and use
17
00010605 B 13
Note
The most comfortable level of cooling is achieved when the screen is
fully open and the exhaust vents are closed.
The highest ventilation level (greatest air displacement) is achieved by
fully opening the exhaust vents and closing the screen.
Fine adjustment of the air stream
Fine adjustment of the air stream can be achieved by adjusting the screen in
combination with the exhaust vents. If, for example, a horizontal air stream is
not
required, the exhaust vents should be shut. If only a horizontal air stream is required,
the screen should be closed and the exhaust vents should be opened. At night, it is
best to adjust the fan or the cooling to level 1.
However, the user is of course free to select any of the possible permutations.
Note
We recommend opening a window or skylight at the front and back of
the sleeping area to maintain a flow of air. The flow of cooled air will
descend towards the floor. If two skylights or windows are open,
warmer air will be forced out of the vehicle by the incoming flow of
cooled air. This ensures optimum air movement.
The window or skylight that is open should be as far away as possible
from the roof unit's exhaust vents (in order to prevent ineffective air
movement).
If all the windows and doors are closed, warmer air will be forced out
of the camper's/caravan's ventilation grilles. This may be insufficient
to allow optimum ventilation and/or cooling.
3.7 Using the cooling function to the best effect
It is better to take measures to prevent the inside of the vehicle warming up, rather
than allowing it to heat up during the day and then turning on the cooling. It is
therefore recommended that you turn on the CABIN 400 as early as possible, e.g.
when you leave the camper / caravan in the morning.
If the vehicle is fitted with roller blinds, we recommend you shut them (when not in
the vehicle). Your accessory supplier stocks standard reflective materials, which can
be applied to the outside face of large glazed surfaces. Windows will otherwise allow
excessive amounts of heat to penetrate to the interior.
3.8 Required water purity and the use of additives
Drinking water must be used for the cooling system in order to avoid the build up of
impurities.
Using an antibacterial additive (additive 2)
Before using the CABIN 400 for the first time, or prior to starting the unit up after a
long period of disuse, we recommend adding an antibacterial additive (additive 2) to
the water as indicated on the packet.