OXTS RT-Backpack Скачать руководство пользователя

Страница: 15 / 16

Oxford Technical Solutions Ltd

www.oxts.com

Page 14 of 14

Checking the communication link

It is possible to check that the communication link is working and there are several ways to do this.

▪

It should be possible to “ping” the IP address of the RT-XLAN. This can be pinged first on the
Ethernet side (i.e. without any wireless communication) and then on the remote side (i.e.
through one RT-XLAN to another).

▪

If the RT-XLAN is working,

then packets from RT systems should be visible from any “node”.

NAVdisplay can be used to receive the packets.

▪

The LED indicators on the RT-XLAN will provide a quick indication of a communication link and
the strength of the signal - as shown in Table 4.

Revision history

Table 5. Revision history

Revision

Comments

130208

Initial version.

141027

Revised for RT-XLAN changes

180222

WEEE update

210303

Updated throughout.

Содержание RT-Backpack

















Результаты поиска

Содержание RT-Backpack

Отзывы:

Похожие инструкции для RT-Backpack

Бренды по названию

Популярные бренды

OXTS RT-Backpack, Руководство пользователя

Результаты поиска

Содержание RT-Backpack

Отзывы:

Похожие инструкции для RT-Backpack

Бренды по названию

Популярные бренды