OXTS RT-Backpack, Руководство пользователя

Страница: 12 / 16

Oxford Technical Solutions Ltd www.oxts.com Page 11 of 14
Figure 10. NAVconfig Step 9 - Save/Finish
NAVconfig Options
Many of the options available in step 7 of NAVconfig do not apply when configuring an RT-Backpack.
Most default options are suitable with the exception of heading lock, which should be disabled. Only
the settings listed here should be reviewed. Care should be taken when reading an existing
configuration from the RT device, or using a saved configuration in case settings have been changed
accidentally.
▪
GPS environment
—change this to suit the operating environment. An RT sensor will only
achieve accuracies that meet its specification in open-sky mode.
▪
Differential
—when using radio modem DGPS corrections, these need setting. See the
Differential Correction Option section of the RT Manual.
−
SBAS
—see SBAS Option section of RT manual.
−
OmniSTAR
— see OmniSTAR Option section of RT manual.
▪
Heading Lock
—this must be disabled in an RT-Backpack application.
▪
Initialisation Speed
—this should be set to the speed of a brisk walk (1 m/s). After initialisation,
this value has no effect on the output.
▪
Displaced Output
—this must be disabled. The hunter RT-Range applies any offsets so any
value entered here will cause an error at the RT-Range.
RT-Range Settings
Because the hunter RT-Range does not differentiate between RT-Backpack and RT-Range target
objects, the RT- Backpack can be configured in the same way as normal RT-Range targets. See the
RT-Range manual for details.