OXTS GPS-Base series страница 3 Скачать руководство пользователя

Страница: 3 / 38

GPS-Base Manual

Revision: 180928

Disclaimer

Information furnished is believed to be accurate and reliable. However, Oxford Technical

Solutions Limited assumes no responsibility for the consequences of use of such information

nor for any infringement of patents or other rights of third parties which may result from its

use. No license is granted by implication or otherwise under any patent or patent rights of

Oxford Technical Solutions Limited. Specifications mentioned in this publication are subject

to change without notice and do not represent a commitment on the part of Oxford Technical

Solutions Limited. This publication supersedes and replaces all information previously

supplied. Oxford Technical Solutions Limited products are not authorised for use as critical

components in life support devices or systems without express written approval of Oxford

Technical Solutions Limited.

The software is provided by the copyright holders and contributors “as is” and any express or

implied warranties, including, but not limited to, the implied warranties of merchantability

and fitness for a particular purpose are disclaimed. In no event shall the copyright holders or

contributors be liable for any direct, indirect, incidental, special, exemplary, or consequential

damages (including, but not limited to, procurement of substitute goods or services; loss of

use, data, or profits; or business interruption) however caused and on any theory of liability,

whether in contract, strict liability, or tort (including negligence or otherwise) arising in any

way out of the use of this software, even if advised of the possibility of such damage.

The GPS-Base includes a radio modem specified at the time of manufacture, and needs to be

configured by the NAVbase software for the specific radio. The exact use of the radio differs

between regions and countries. The user of a GPS-Base must ensure the device is not

operated in any way without the permission of the local authorities on frequencies; other than

those specifically reserved and intended for use without a specific permit. OxTS or its

distributors are not responsible in any way for any claims or penalties arising from the

operation of its equipment with radio in ways contradictory to local regulations and/or

requirements and/or laws.

Contact details

Tel: +44 (0) 1869 814 253

Fax: +44 (0) 1869 251 764

Web: http://www.oxts.com

Email: [email protected]

Oxford Technical Solutions Limited

77 Heyford Park

Upper Heyford

Oxfordshire

OX25 5HD

United Kingdom

Revision

Document Revision: 180928.

Содержание GPS-Base series







































Результаты поиска

Содержание GPS-Base series

Отзывы:

Похожие инструкции для GPS-Base series

Бренды по названию

Популярные бренды

OXTS GPS-Base series, Руководство пользователя

Результаты поиска

Содержание GPS-Base series

Отзывы:

Похожие инструкции для GPS-Base series

Бренды по названию

Популярные бренды