OXTS GPS-Base series Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 38

OXTS GPS-Base series Скачать руководство пользователя страница 15

GPS-Base Manual

Revision: 180928

15

Conformance notices

Any use or misuse of the GPS-Base, in a manner not intended by OxTS, may impair the

protection provided.

The GPS-Base complies with the radiated and conducted emission limits for CISPR 25 Level

2 and Class B of Part 15 of the FCC rules, and with the radiated emission and immunity limits

for Class B of EN 61326. These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Re-orient or relocate the receiving antenna

• Increase the separation between the equipment and the receiver

The GPS-Base conforms to the requirements for CE.

Regulatory testing standards

• EN 55025

• CISPR 25 Level 2

• EN 61000-4-2

• EN 61000-4-3

• EN 55001 (EN 61326) Class B

«
...
13
14
15
16
17
...
»

Содержание GPS-Base series







































Отзывы:

Нет отзывов