OXO [T]Box RDM, Инструкция пользователя

Страница: 26 / 30

This option can test whether there are some errors when transmitting MIDI data. When the
cable isn't connected normal and you have accessed this function, the LCD window usually
shows .
< MIDI data --- RX
S
< MIDI data --- RX
S FE FE FE FE FE FE
FE 43 00 45 00 FE
90 43 00 FE FE FE
FE means NULL signal
< System set up :
1. DMX setting >
2. English >
3. Display setting >
< 1.DMX
Start code TX : 000 >
MAX value : Normal >
?
Confirm >
You can set the start code for DMX 512 signal transmission. Generally, you need not to
adjust it.
Turn the Dial wheel to DMX setting and press it, then the LCD window shows the following
message for you.
1. DMX setting
In this menu you can set the system settings at your disposal. There are three sub-menus for
your choice, including DMX setting, Language, Display setting. You can set the DMX display
mode, value display mode, and so on.
Turn the Dial wheel to System setup and press it to enable this function. The LCD window
shows as follows.
System setup
However, if there are signal inputs and no errors, the LCD window usually shows as follows:
MIDI data -- RX
User's Instruction
Page 26
[T]Box-RDM