OXO [T]Box RDM, Инструкция пользователя

Страница: 25 / 30

The default cue no. is preset to be 001. You can change the default cue number to the desired
one.First locate to > at the second line and turn the Dial wheel for this purpose.To save the
received data, press > at the third line to confirm. Otherwise, automatically save the received
data and the cue number will increase by 1 for the next saving.
< Save Cue ( Scene )
The cue with 512 data
can be stored to
memory or clear cues
< Cable Test ---
Result:
> Cable Pass
< Cable Test ---
Result:
> Cable failure
Otherwise, if the cable can not work normal, the LCD window shows:
Use the standard DMX In/Output of this unit for connecting the cable. One head for female
plug-in, another head for male plug-in. Then press > at the fourth line to start the test, If the
cable works normal, the LCD window shows as follows:
When enable this function, you can test the cable whether there are errors or not.
Cable test
NOTE: After you have locate to > at the second line, turning the Dial wheel can allow you to
select the " Clear all Cues ". When you confirm this function, the LCD window will ask for
you " Be sure ? Yes > No > " at the fourth line . Press the first label > to confirm, all the
stored cues will be cleared out. For no clearing the cues, press the second label > to
quit. For more information,press ? for help.
User's Instruction
Page 25
[T]Box-RDM