OXO [T]Box RDM, Инструкция пользователя

Страница: 17 / 30

User's Instruction
The manufacturer specific PIDs are displayed with hex form and which were excluded from
the above 45 or 28 PIDs .
. 3)
4)You can carry out GET "DMX_PERSONALITY_DESCRIPTION", GET"SENSOR_DIFINITION"
and GET"SENSOR_VALUE" only you if perform GET " DEVICE_INFO" first.
.
5)You can GET or SET the relevant PID only if you perform GET " PARAMETER_
DESCRIPTION" first.( " PARAMETER_DESCRIPTION" is a description for the relevant
manufacturer specific PID.)
.
For "COMMAND:GET", when the UID(Unique ID) was chosen, the PID (parameter ID) can
only be selected in the range of which the device supported, a part of the 45 PIDs or all
of them.
.
NOTE
1)
Likewise, for "COMMAND:SET", the PID can only be selected in the range of which the
device supported as well, a part of the 28 PIDs or all of them.
. 2)
Turn the dial wheel to select the ">" of the second line right, you can select the unit you want to
set the command for it.
Turn the dial wheel to select the ">" of the third line right, you can select and set the value for
each parameter. There are 28 parameters available for "COMMAND: SET"( Please refer to the
tables on the following pages for details).
.
Page 17
6)You can carry out GET "STATUS-ID_MESSAGES" only if you perform GET " STATUS_
MESSAGES" first.
.
[T]Box-RDM