OXO Simoun 2 RW, Инструкция по эксплуатации

Страница: 6 / 20

User Manual - SIMOUN 2 [R] W V1.3 05/2018 6/20
4. Operation Guide
General
Plug in the appropriate power outlet, this unit recovers to the function state of last time automa-
tically by reasons of power failure memory, and the Segment Display shows the DMX address
of last change. If the frequency of power is not stable, the Segment Display will show «AC-0»,
wait until the power is stable.
This unit serves as a dimmer pack or a switch pack, depending on operating
mode you’ve selected.
4.1 Wireless / DMX Mode
.8:8:8:8
ME NU
1. Press MENU until the display show or .
2. Press UP/DOWN to choose the mode.
: control is done by Wireless DMX
: control is done by DMX
4.2 DMX Address Mode
.8:8:8:8
ME NU
1. The Segment Display shows the DMX address of last
change when powered this unit.
If you’ve selected DMX address 123 for the last
time, then the Segment Display will read 123.
.8:8:8:8
ME NU
2. Each tap of the Up or Down button will change the DMX
address once. Pressing and holding down will change the
DMX address quickly.
Once the DMX address is selected, it will be
stored into memory automatically.
NOTE: During DMX addressing, output is disabled.