![oxic XPM9A261A Скачать руководство пользователя страница 9](http://html1.mh-extra.com/html/oxic/xpm9a261a/xpm9a261a_installation-and-programming-manual_1665038009.webp)
2.1 Safety Notice
Aim to guarantee user to use the product correctly and avoid danger or loss of property.
Defence measure is including two parts “Warning” and “Notice” as follows:
Warning: Ignoring warning may cause death or great damage.
Notice: Ignoring notice may cause damage or loss of property.
Warning remind user to defend potential
factor of causing death and great
damage
Noitce remind user to defend potential
factor of causing damage or loss of
property.
Warning
1, Completely according to the national or regional electric specification when installing and using the product.
2, Please using adapters from normal supplier.
Don’t connect multi cameras with one adaptor ( Exceeding the loading of adapter may generate excess heat or fire)
3, Turn off the power supply when connecing or dismantling the camera, never operate the dome camera with power.
4, Completely fix the speed dome camera when installing the item on wall.
5, If there is fume, fetor or noisy of the dome camera, please turn off power supply immediatly and pull out the cable;
And contact with our sales department right away.
6, If the camera can’t work normally, please contact with us and never dismantle it. (We are not responsible for any
unauthorized modification or dismantling.
Notice
Prior to installation and use of this product, the following WARNING should be observed. This product can be only
used in specified range in order to avoid any damage or danger.
z
Installation and servicing should only be done by qualified service personnel;
z
It can not be used in unqualified temperature( over 55
℃
or below -40
℃
), high humidity ( otherwise firing may
be caused)
z
Only use replacement parts recommended by us.
z
After replacement/repair of this unit’s electronic components, conduct a resistance measurement by
multimeter
to avoid short circuit or turnoff.
z
Please use the soft cloth to clean the camera. Use neuter cleanser if bad smeared. No use the strong or corrosive
cleanser avoiding scuffing.
z
The installation bracket should be capable of supporting five times the total weight of the integrated camera.
z
Keep the product away from anti-magnet fied, make sure not to install it shook and impactive area, and never
let other objects fall on the product. (ignoring the tip may cause equirpment damage)
Please thoroughly read this manual prior to installation and operation.