The third step; Input the 4 numbers that are same with the Identify Code and press OPEN button to confirm, the screen
will display “Correct Identify Code” and English menu will display ”Right” if the confirmed Identify Code is identical to the
number that system offered, the screen will display “Wrong Identify Code” and English menu will display ” Wrong” if the
Confirmed Identify Code is different to the number that system offered.
Fourth, remove cursor to Protocol P or Protocol D and use UP/DOWN to change Protocol P address or Protocol D address
to the targeted address. (Once one of the address changed, the other one will change automatically)
Fifth, after changement, open IRIS to affirm the address; and on the bottom of the screen it will note: Please Change
Controller’s Address, which means the address, has been changed successfully and the controller’s address also needs to
be changed.
（
Back
）
Return to the former menu
Note: Except the “ Enable Password”, “ Auto Exit Time”, : Address Set”, other items can only be displayed, can not be
changed in this menu.
6.3.2 Screen Display Setting Menu
Chinese Menu
English Menu
（
User Name Label
）
Default Setting:
：（
Off
）
Setting mode
：
On and Off
（
<User Name Set>
）
Set the user self-defined Label: press the Open for Iris, and user Name Set menu will be displayed in the screen
Chinese Menu English Menu
