-13
-
4. Pedestal level setting
Move the cursor to PESESTAL position, while observing the color video monitor or
waveform monitor / oscilloscope , press LEFT/RIGHT key to adjust the pedestal
level.
5. Chroma suppress effect level setting
This parameter is for control the timing of minimal lighting level when the camera
picture swaps from color into monochrome.
Increase the parameter value toward late swap at lower lighting level, the default
setting is around 2 Lux.
Move the cursor to SPRS EFCT position, adjust the value by LEFT/RIGHT key.
6. Chroma suppress gain
This parameter control the color gain when the picture swap from color into
monochrome under low light, set the value to “0” for completely black and
white picture effect, set the value to maximum for no color suppress effect.
PATTERN MENU
This function is good for quick color monitor
calibration and cable signal condition checking.
Move the cursor to PATTERN position to turn ON
or OFF the pattern generator.
Move the cursor to TYPE to select the pattern
type.
Move the cursor to COLOR for different color display selection.
APERTURE MENU
Move the cursor to AP GAIN L for horizontal low
frequency aperture correction. (00-03)
Move the cursor to AP GAIN H for horizontal low
frequency aperture correction. (00-03)
Move the cursor to V AP GAIN for vertical aperture
correction. (00-15)
GAMMA MENU
1.Move the cursor to Y GAMMA ADJ to turn on or
off the gamma correction.
Turn off the Y gamma ADJ for gamma = 1.
Off1 for gamma=1 with no knee effect.
Off2 for gamma=1 with knee on effect.
PATTERN MENU
PATTERN OFF
TYPE HSR
COLOR BLUE
RETURN
APERTURE MENU
AP GAIN L
02
AP GAIN H
02
V AP GAIN
10
RETURN
GAMMA MENU
Y GAMMA ADJ ON
Y GAMMA
04
Y KNEE
00
C GAMMA ADJ ON
C GAMMA
04
C KNEE
07
RETURN
