-4
-
A.
C (CS) mount adapter if a CS mount lens is to be used, remove the C mount ring
B.
Holder screw hole
Standard photographic pan-head screw size (1/4” – 20) Flange focal lock screw
C.
Flange focal lock screw
D.
Flange focal distance adjuster—if back focus adjustment this ring
E.
Auto iris lens connector (MINI JACK)
Use the accompanying auto iris lens control connector plug.
For auto iris lens is with built-in EE amp. (VIDEO Type)
Set the lens selector switch to ”VD” position.
Connector cable leads
1.Red --- power 3.White --- video
2.NC 4.Black --- shielded
For auto iris lens is without EE amp. (DC Type)
Set the lens selector switch to “DD” position.
Connector cable leads
1. Damping coil (-)
3. Driving coil (+)
2. Damping coil (+) 4. Driving coil (-)
F. Video output terminal (BNC)
This connector is used to connect with the VIDEO IN connector of monitor.
G. On-Screen Display keypad
H.
Slide out for control panel
I. Power pilot LED
J. DC12V / AC 24V Block Terminal
This terminal accepts DC 12V(Non-polarity) or AC 24V.
The other model: AC 85 ~ 265V.
K. External project control I/O and Remote control terminal
Back focus
thumbwheel
Thumbwheel locking screw
and provided screwdriver
