background image

E Series

 

User Manual

5

5-3. Units

The most common unit of weight used around the world is gram, but there is often a need to shift to
alternative units specific to the country where the balance is used or to select modes such as counting or
percent.

The units and the order they appear in the display are as follows:

Among the units, those available for the user have been set at the factory before shipping.
The unit can be selected in the function setting mode. The order of the units available is the same as
above, while skipping the units that are not available.

Some units are not available on different models. For details, see “13. Specifications” 

Conversion table

Units

Name

Conversion to gram

oz

Ounce (avoir)

28.349523125 g

lb

Pound (UK)

453.59237 g

ozt

Troy ounce

31.1034768 g

ct

Metric carat

0.2 g

mom

momme

3.75 g

dwt

Pennyweight

1.55517384 g

GN

Grain (UK)

0.06479891 g

tl

tael (Hong Kong general, Singapore)

37.7994 g

• Note

The unit “tl

 

(tael)” is for special version only.

Gram

Counting mode

Percent mode

Ounce (avoir)

Pound

Troy ounce

Metric carat

Momme

Pennyweight

Grain

Tael

Содержание E12001





















Отзывы: