-9-
Steps :
1. Select Pip Mixing from the applications.
2. Select volume by using up/down arrow key.
3. Select Mixing Cycles by using up/down arrow key Max. 10
cycles can be selected.
4. Aspirate the selected volume by using trigger key.
5. Dispense the selected volume by using trigger key.
6. Mixing will automatically start .
7. You can stop mixing by using ESC key.
8. Press trigger key to start the mixing again / Press the
ESC key to completely stop mixing in between the
process. It will discard the excess liquid remaining in the tip.
6.6.3 Di Mixing
Steps :
1. Select Diluting from applications.
3. Select Di Mixing.
4. Select No. of Dilutants. Max. 2 dilutants can be selected.
5. Select 1st volume by using up / down arrow key.
6. Select 2nd volume by using up / down arrow key.
7. Select Mixing Cycle by using up / down arrow key. Max. 10
cycles can be selected.
8. Aspirate 1st volume by pressing trigger key.
9. Aspirate Air by pressing trigger key.
10. Aspirate 2nd volume by pressing trigger key.
11. Dispense total volume in vessel by using trigger key.
12. Mixing will automatically start once you dispense the liquid
into the vessel.
13. You can stop mixing by using the ESC key.
14. Press trigger to start the mixing again / Press the
ESC key to completely stop mixing in between the
process. It will discard the excess liquid remaining in the tip.
6.7 Settings
6.7.1 : Speed
Steps :
1. Select Settings from the applications.
2. Select Speed.
3. Change the Aspiration Speed by using up/down arrow key and
press OK.
4. Change the Dispense Speed by using up/down arrow key and
press OK.
5. You will find new aspiration and dispense speed on the
display.
6. If you do not want to change any speed, press ESC key.
This is a control menu where you can define Speed, Sound, User ID and
Product ID of the pipette.
6.6.2 Pip Mixing