Oxford Instruments Andor Balor Скачать руководство пользователя страница 10

Страница: 10 / 72

Version 1.0 rev 14 Aug 2019

Balor

aRning

and

afety

abels

The serial label of the Balor camera (below) is located on the back of the camera. It shows the product model, serial
number and the build date.

npacking

nfoRMation

Carefully unpack the unit and retain the packaging materials to transport or return equipment if required:

•

If the equipment appears damaged in any way, return it to sales outlet in its original packaging.

•

No responsibility for damage arising from the use of non-approved packaging will be accepted.

•

Ensure all items and accessories specified at the time of ordering and as detailed on the packing list are
present: if any items are missing, please contact your sales representative.

•

The camera has a shipping cover - remove before use and store in a safe place so it may be used at a future
time.

BSC - 123456
July 01, 2019

BLR-F401-NN

Model No.:
Serial No.:

Date:

Содержание Andor Balor









































































Результаты поиска

Содержание Andor Balor

Отзывы:

Oxford Instruments Andor Balor, Руководство по оборудованию, Страница: 10 / 72

Результаты поиска

Содержание Andor Balor

Отзывы: