Vulcan Series
19
After the measurement, you should do the following:
1.
OPTIONAL:
The tags can either be selected or deselected for a sample in the results screen by
tapping the Tag
and then selecting the appropriate tag for the sample.
2.
Check that the result is OK.
3.
If you’re not happy with the result (the instrument wasn’t properly positioned etc.), you can tap
the Delete
to remove it.
4.
If Averaging is on, instead of the Delete icon there is a Redo
. Use this to redo the
previous measurement without affecting the measured Averages.
5.
Pull the trigger to measure the next sample.
Measuring programs
What is a measuring program?
Specific settings may be needed for measuring different samples. These are stored as programs.
The default program is Analyze. After first time use, the instrument will remember the last used
program.
●
Selecting a program
○
Open pull-down menu.
○
Tap Measuring Program.
○
Tap the program name you want to use.
