OXE Gepard, Руководство пользователя

Страница: 13 / 17

11
In test mode you can work out the optimum exposure angle and the
range of the motion sensor.
1.1 During alignment consider whether the use of the side motion
sensors may be useful for attaining the desired observation results.
1.2 Align the camera as follows:
Fasten the camera to a tree or similar object at a height of 1-2 meters
and align the camera in the desired direction. Then move slowly from
one side of the target area to the other side. While doing this, monitor
the motion display.
1.2.2 If this lights up in blue, you have been detected by one of the
activated side motion sensors. If it lights up in red, you have been
detected by the front motion sensor. In this way, you can work out the
best alignment for the camera.
1.2.3 The motion display only lights up when operating mode selector
switch is in the TEST position and one of the motion sensors has
detected movement. During normal operation, there will be no LED
display in this area.
1.2.4 To ensure that the camera doesn’t make unwanted recordings of
irrelevant movements, it should not be set up in a sunny location or
close to branches. The detecting range of the sensors is 80°. And the
recording angle of the camera is about 90°.
2. Normal working mode
In this mode, recordings are triggered via the motion sensors.
To set live mode, slide the operating mode selector switch to the “ON”
position. After 15 seconds, the LED of motion display will go off.