5.Panel Operation
12
2
of Figure 5-1, a blinking cursor appears in the parameter value of high level. Turn
the
knob
to change the value directly, or use the
numeric keypad
to input the
desired value and choose the unit.
Set the low level
Press the
Offset/Low
softkey to confirm whether the
Low
menu item is highlighted;
if not, press the
Offset/Low
softkey to switch to
Low
. In
Parameter 3
of Figure 5-1, a
blinking cursor appears in the parameter value of low level. Turn the
knob
to change
the value directly, or use the
numeric keypad
to input the desired value and choose
the unit.
Set the start phase
Press the
Start Phase
softkey, the
Start Phase
menu item is highlighted. In
Parameter
4
of Figure 5-1, a blinking cursor appears in the parameter value of start phase. Turn
the
knob
to change the value directly, or use the
numeric keypad
to input the
desired value and choose the unit.
Output Square Wave
Press
, the screen displays the user interface of the square wave. The Square
waveform parameters can be set by operating the Square setting menu on the right.
The square wave menu includes:
Frequency/Period
,
Amplitude/High Level
,
Offset/Low Level
, and
Start Phase
.
To set the Frequency/Period, Amplitude/High Level, Offset/Low Level, Start Phase,
on page 10.
Channel
Parameter 4
Current signal
Period
High Level
Low Level
Parameter 1
Parameter 2
Parameter 3
Setting menu of
Square signal
Current
signal
Load
Output
switch
Figure 5-3: Square wave user interface
