User’s Manual of
OWON
Colour Digital Storage Oscilloscope
23
Advanced User's Guidebook
Up till now, you have already been familiar with the initial operations of
“VERTICAL CONTROLS”, “HORIZONTAL CONTROLS”
and
“TRIGGER
CONTROLS”
, and the functions of the function areas, buttons and knobs in the front
panel of the PDS series oscilloscope. Based the introduction of the previous Chapter,
the user should have an intimate knowledge of the determination of the change of the
oscilloscope setting through observing the status bar. If you have not been familiar
with the above-mentioned operations and methods yet, we advise you to read the
section of “Chapter One Junior Users' Guidebook”.
This chapter will deal with the following topics mainly:
z
To set the Vertical System
z
To set the Horizontal System
z
To set the Trigger System
z
To perform the Sampling Setup
z
To set the Display System
z
To Save and Recall a Wave Form
z
To perform the Auxiliary System Function Setting
z
To perform the Automatic Measurement
z
To perform the Cursor Measurement
z
To use Autoscale function
z
To use Executive Buttons
It is recommended that you read this chapter carefully to get acquainted the various
measurement functions and other operation methods of the PDS series oscilloscope.
