Owon Lilliput HDS2062M-N Скачать руководство пользователя страница 54

Страница: 54 / 74

HDS2062M-N Handheld DSO & DMM

7-Advanced Function of Oscilloscope

See the following figure 44:

Figure

44:

7.8 Waveform Saving Setups

The oscilloscope can save 4 waveforms, which can be displayed on the screen with the present
waveform. The recalled waveform saved in the memory cannot be adjusted.

The

waveform saving /recalling menu

is described in the following list.

Function
menu

Setups Description

Source CH1

CH2
MATH

Make sure the waveform you want to save appears in the
display. Select the displayed waveform which you want to
save.

WAVE

A, B, C and D Select the address for saving or recalling a waveform.

Save

Store the waveform of a selected signal source into the
selected address.

Show ON

OFF

Close or start displaying the waveforms stored in address A,
B, C or D.

To save a waveform on CH1 in address A, do the following:

1. Press

the

MENU

key and the function menu appears at the right of the screen.

2. Press

the

MENU

▲

MENU

▼

key to select the Waveform Saving. Four options are

displayed at the bottom of the screen.

3. Press

the

key to select the signal source CH1.

4. Press

the

key to select the address A.

5. Press

the

key to save the waveform on CH1 in address A.

To display the saved waveform on the screen, do the following:

6. Press

the

key to select Start for the address A. The waveform saved in address A will be

４８

Содержание Lilliput HDS2062M-N











































































Результаты поиска

Содержание Lilliput HDS2062M-N

Отзывы:

Owon Lilliput HDS2062M-N, Руководство пользователя, Страница: 54 / 74

Результаты поиска

Содержание Lilliput HDS2062M-N

Отзывы: