HDS2062M-N Handheld DSO & DMM 6-Using the Multimeter
To measure an AC current which is larger than 400 mA, do the following:
1.
Press the
SET
key once and ACA is visible at the top of the screen.
2.
Press
F5
to select
10A
measure, the unit of main reading window is
A.
3.
Plug current extended module in current measure jack, then plug the probe in the module.
4.
Connect the red and black leads to the measured point and the
AC
current value of the
measured point will be displayed on the screen.
5.
Press F4 return to 400mA measure.
Look at the display; you can see a screen that looks like the following figure 29.
figure 29: AC Current Measurement for 10A
6.5 Freezing the Readings
You can freeze the displayed readings at any time.
1.
Press the
RUN /STOP
key to freeze the screen and
STOP
will be displayed at the top right
of the screen.
2.
Again, press the
RUN /STOP
key, you can resume your measurement.
Look at the display; you can see a screen that looks like the following figure 30.
32