Owon Lilliput HDS2062M-N Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 74

Owon Lilliput HDS2062M-N Скачать руководство пользователя страница 2

WARRANTY

Lilliput warrants that this OWON brand product will be free from defects in materials and

workmanship for a period of three years (one year limited warranty applies to the accessories)
from the date of shipment. Lilliput warrants that software will operate substantially in accordance
with its functional specifications for 90 days and that it has been properly recorded on
non-defective media. Lilliput does not warrant that software will be error free or operate without
interruption.

To obtain warranty service, contact your nearest Lilliput’s authorized service center or send

the product, with a description of the difficulty. Customer shall be responsible for shipping
charges, freight, insurance and proper packaging to prevent damage in transit. This warranty does
not apply to defects resulting from action of the user such as misuse, improper wiring, operation
outside of specification, improper maintenance or repair, or unauthorized modification. Lilliput
shall not be liable for any special, indirect, incidental or consequential damages or losses,
including loss of data, whether arising from breach of warranty or based on contract, tort reliance
or any other theory, its total liability is limited to repair or replacement of the product. All replaced
parts, modules and products become the property of Lilliput.

Lilliput authorized dealer shall extend this warranty on new and unused products to end-user

customers only but have no authority to extend a greater or different warranty on behalf of Lilliput.
Warranty support is available if product is purchased through a Lilliput authorized sales outlet or
Buyer has paid the applicable international price. Lilliput reserves the right to invoice Buyer for
importation costs of repair/replacement parts when product purchased in one country is submitted
for repair in another country.

Since some countries or states do not allow limitation of the term of an implied warranty, or

exclusion or limitation of incidental or consequential damages, the limitations and exclusions of
this warranty may not apply to every buyer. If any provision of this Warranty is held invalid or
unenforceable by a court of competent jurisdiction, such holding will not affect the validity or
enforceability of any other provision.

SERVICES CENTER

To locate an authorized services center, visit us on the World Wide Web:

HTTP://WWW.OWON.COM.CN

2

«
1
2
3
4
...
»

Содержание Lilliput HDS2062M-N











































































Отзывы:

Нет отзывов