background image

  OWI INC.  ICM6-730SET (All-N-One) CEILING SPEAKERS – INSTALLATION GUIDE 

14

WARRANTY 

 
OWI Limited Warranty 

 
OWI loudspeakers are warranted for five (5) years from the date of sale to the original purchaser. 
 
Who is protected? 
Your OWI warranty protects the original owner and all subsequent owners. The original bill of 
sale must be presented whenever warranty service is required. 
 
What is covered? 
OWI loudspeakers are warranted to be free from defects in material or workmanship provided 
that the product has not been subjected to abuse or accident or altered in any way. 
 
Any part of the product covered by this warranty that, with normal installation and use, becomes 
defective will be repaired or replaced by OWI, at our option, provided the product is shipped 
insured and prepaid to OWI at the address below. The product will be returned to you freight 
prepaid. 
 
This warranty does not extend to any of our products that have been subjected to misuse, 
improper storage, neglect, accident, improper installation, or have been modified or repaired in 
any manner that OWI believes may affect the reliability of the product, or where the serial 
number or date code has been removed or defaced. 
 
THE FOREGOING LIMITED WARRANTY IS OWI'S SOLE AND EXCLUSIVE 
WARRANTY AND THE PURCHASER'S SOLE AND EXCLUSIVE REMEDY. OWI MAKES 
NO OTHER WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED AND ALL 
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR 
PURPOSE ARE HEREBY DISCLAIMED AND EXCLUDED. 
 
OWI’s liability arising out of the manufacture, sale or supplying of products or their use or 
disposition, whether based upon warranty, contract, tort or otherwise, shall be limited to the price 
of the product. In no event shall OWI be liable for special, incidental or consequential damages 
(including, but not limited to, loss of profits, loss of data, or loss of use damages) arising out of 
the manufacture, sale or supplying of products, even if OWI has been advised of the possibility of 
such damages or losses. 
 
Products that are out of warranty will also be repaired by the OWI Service Department. The parts 
and labor involved in these repairs are warranted for 90 days when repaired by OWI. All shipping 
charges in addition to parts and labor will be at the owner's expense. 
 
Contact Us 

OWI INC 

17141 KINGSVIEW AVE 
CARSON, CA 90746 
USA 
 
Customer Service 1-800-638-1694    
Technical Support & Service 1-800-638-1694

 

Содержание ICM6-730SET

















Отзывы: