EN
Owandy Visteo – User manual
Page 10/30
3.2.4
Box and sensor supports
The box can be mounted or placed in different ways by using the
support supplied with the kit. The support accepts the connection box
(fitted with the disc with a clip), the positioner and a sensor size 1 or
size 2 (with or without the sensor connection cable).
Do not mount the wall support of the box upside-down or
vertically, the box and sensor could fall on the ground and
be damaged.
Attach the support with the strap: you can use the strap to attach
the support, e.g. to the chair, the arm of your X-ray generator, to the
head rest of your chair. Pass the strap through the slits in the support
(as indicated in the drawing underneath) and close it on itself to
ensure the Velcro fastening holds.
Attach the support with the screws: you can attach the support permanently to a worktop with the
screws provided with the kit.
To mount the wall support, drill 2 holes according to the
outline opposite. Insert the plugs, position the support by
aligning the holes in the support with the plugs and screw
in the screws.
15mm / 0.6inch of space
3mm /
0.12inch
diameter
