NEO S-Series Library Service Manual
Replacing Parts
10400666-005
©2015-20 Overland-Tandberg
33
Before sending back the old library:
1.
Place
shipping lock
in the unit:
a.
Remove the
yellow label
that is covering the securing slot for the shipping lock on
the top of the library.
b.
Remove the
shipping lock
from the holder on the back of the unit and place it in the
slot on top of the unit to secure the robotics.
c.
Replace the
yellow label
(or use any other tape) over the shipping lock to secure it.
2.
At the rear, extend the
pull-out tab
with the product ID label and note the
part
number and serial number
of the unit.
3.
Use the appropriate figure for
packaging
your library for shipment.
Packaging the 1U or 2U Library
Packaging the 4U Library
