Overland Storage LXLS10, Руководство пользователя и инструкция по установке

Страница: 61 / 90

Maintenance
t
4-3
C
LEANING
C
ARTRIDGE
Press the
q
button three times to move the
u
next to Maintenance Menu, then press the Enter
button to select the Maintenance Menu. The display will show something similar to the
following.
Figure 4-2. Maintenance Submenu
Press the Enter button once to select Clean Drive. The following screen appears.
Figure 4-3. SDLT Cleaning Submenu
Line 2 is not scrollable. Press the Enter button once to accept SDLT1. The
u
moves to line 4 of
the display. The choices available on Line 4 are slots 1 through 5, or 1 through 10. Press the
Enter button again to use the cartridge in Slot 1.
If you are unable to use slot 1 for the cleaning cartridge, you can scroll line 4 to select another
slot. If you have set up reserved slots, line 4 will refer to “Cleaning Slot1”, which is the first
reserved slot.
The Clean Confirmation Screen appears, as shown below.
Figure 4-4. SDLT Cleaning Confirmation Screen
As the confirmation screen indicates, to execute the cleaning operation, press the Enter button.
If the confirmation screen does not show your intended drive and cleaning cartridge, press the
Escape button to return to the Cleaning submenu.
Clean Drive Clean Drive Clean Drive Clean Drive
Diagnostic Menu Diagnostic Menu Diagnostic Menu Diagnostic Menu
Demo Menu Demo Menu Demo Menu Demo Menu
Flash Update
Flash Update Flash Update
Flash Update
iiii
Cleaning: Cleaning: Cleaning: Cleaning:
u u u u ✳ ✳ ✳ ✳ SDLT1 SDLT1 SDLT1 SDLT1
Using
Using Using
Using
✳ ✳ ✳ ✳ Slot1 Slot1 Slot1 Slot1
Clean:
Clean: Clean:
Clean:
ENTER to Execute ENTER to Execute ENTER to Execute ENTER to Execute
ESCAPE to Cancel ESCAPE to Cancel ESCAPE to Cancel ESCAPE to Cancel
SDLT
SDLT SDLT
SDLT
Use:
Use: Use:
Use:
SLOT1
SLOT1 SLOT1
SLOT1