Operation
t
3-19
I
NSERTING
AND
R
EMOVING
C
ARTRIDGES
The Control Panel lock also prevents you from accessing the Unlock Door selection on the Main
Menu. For a detailed discussion of magazine locking, see
“Inserting and Removing Cartridges”
later in this chapter.
To display the Status Menu while the Control Panel is locked, press the
Escape
button at the
Default Screen.
When you press the
Enter
button, the Code Entry Submenu displays:
Figure 3-22. Code Entry Submenu
Use the
p
and
q
buttons to set the first digit of the unlock code. Press the
Enter
button to move
the cursor to the second digit and repeat the process. When you have finished, press the
Escape
button. Press the
Enter
button to validate the unlock code or the
Escape
button to exit. If the
code is correct, the Main Menu is displayed. If the code is incorrect, an error screen appears.
Displaying Firmware Revision
The library robotics firmware revision can be displayed at any time. It appears as one of the
item selections on the Library Status submenu of the Show Status Menu. It is also displayed on
line 2 of the POST Screen and the Initialization Screens.
Inserting and Removing Cartridges
You must remove the tape magazine from the module in order to insert or remove cartridges.
When inserting cartridges, be sure that the slot you intend to use is not already reserved in the
system map for a cartridge in a drive. The best way to avoid conflicts is to unload the drive,
either through your host computer software, or by using the Load/Unload command on the
Main Menu, described later in this chapter.
To insert or remove the magazine, make sure of the following:
•
The Control Panel is unlocked
•
The host computer must allow removal of the magazine using the SCSI Prevent/Allow
Medium Removal command. To release the lock, exit the host software. If host
computer failure prevents the host from releasing the lock, cycle power to the
PowerLoader .
Front Panel Locked
Front Panel Locked
Front Panel Locked
Front Panel Locked
ENTER to Unlock
ENTER to Unlock
ENTER to Unlock
ENTER to Unlock
u
u
u
u
ESCAPE to Exit
ESCAPE to Exit
ESCAPE to Exit
ESCAPE to Exit
hhhh
iiii
Содержание LXLS10
