Overhead door RHX NEMA 7, Руководство по установке

Страница: 43 / 56

6.6
Selecting a 1- Button or 3- Button Control Station
The operator can support one or more 3-button (individual Open/Close/Stop) stations
or 1-button stations. However, it cannot support combinations of the two at the same
time. The type of control station(s) used with the operator must be selected using a
Configuration Option Switch.
Note:
If the operator is configured for a 3-button station and a 1-button station is connected,
the door will only move in the up direction.
If the operator is configured for a 1-button station and a 3-button station is connected,
the CLOSE button will be ignored and the OPEN button will act as the 1-button.
1) Slide CONFIGURATION OPTION Switch (B) #4 to the ON position to select a 1-button
control. Slide the switch to the OFF position to select a 3-button control.
Section 6: Operator Configuration
24
VA
C
(C
on
trol)
COMMONS
24VDC OUT
C
on
trol
Inputs
STOP CLOSE OPEN
MRT
CLEAR
CYCLE
COUNT
1-Phase
3-Phase
OVERRUN
TIMER
TIMER TO
CLOSE
CONFIGURATION OPTION SWITCHES
8 7 6 5 4 3 2 1
OFF
ON
SW401
ERR
OR
CY
CLE C
OUNT
CL
OSE LIMIT
OPEN LIMIT MR
T CLEAR
RUNNING TLC
CONFIGURATION OPTION SWITCHES
SW401
SWITCH POSITION
SWITCH # ON OFF
1
2
3
4
5
6
7
8
Momentary Close Constant Close
Momentary Open Constant Open
Constant Reverse Constant Stop
1-Button 3-Button
TC 3-Strike Disable TC 3-Strike Enable
Motor Rotation Normal Motor Rotation Reverse
Limit Orientation Normal Limit Orientation Reverse
Unused Unused
B
Setting Max Run Timer (MRT)
The Max Run Timer (MRT) will automatically set itself once the operator is run a full
cycle. The MRT LED will go out.
RE-Setting Max Run Timer (MRT)
Press and hold the MRT clear key briefly until MRT LED flashes, release MRT key. MRT
LED should be on solid.
Cycle door 2 full cycles : full open to full close to full open or full close to full open to full
close, without stopping mid travel, to reset MRT.
24
VA
C
(C
on
trol)
COMMONS
24VDC OUT
C
on
trol
Inputs
STOP CLOSE OPEN
MRT
CLEAR
CYCLE
COUNT
1-Phase
3-Phase
OVERRUN
TIMER
TIMER TO
CLOSE
CONFIGURATION OPTION SWITCHES
8 7 6 5 4 3 2 1
OFF
ON
SW401
ERR
OR
CY
CLE C
OUNT
CL
OSE LIMIT
OPEN LIMIT MR
T CLEAR
RUNNING TLC
CONFIGURATION OPTION SWITCHES
SW401
SWITCH POSITION
SWITCH # ON OFF
1
2
3
4
5
6
7
8
Momentary Close Constant Close
Momentary Open Constant Open
Constant Reverse Constant Stop
1-Button 3-Button
TC 3-Strike Disable TC 3-Strike Enable
Motor Rotation Normal Motor Rotation Reverse
Limit Orientation Normal Limit Orientation Reverse
Unused Unused