ClimaCon F
Troubleshooting
9. Troubleshooting
MALFUNCTION
CAUSE
REMEDY
The app does not find the room
thermostat during teach-in.
Other devices equipped with
Bluetooth interfere with the
connection between the room
thermostat and smartphone.
During the teach-in process, temporarily
switch off all Bluetooth-equipped devices
that are not needed.
The display shows the message “F”
pulsating every 10 seconds for
1 second.
The temperature measured at the
internal temperature sensor has
dropped below 6 °C (43 °F).
The frost protection function is
activated (two point / PWM) is
switched on).
If the temperature measured at the internal
temperature sensor rises above 6 °C (43 °F),
the frost protection function is
automatically deactivated.
The message “F1” appears in the
display.
The device has measured implausible
temperature values or the
temperature measurement has failed.
Contact the technical service.
The message “F3” appears in the
display.
Auto mode cannot be activated
because no correct time and date
information is stored in the ClimaCon.
Connect your ClimaCon to your
smartphone via Bluetooth. Valid time and
date information is transferred from the
smartphone to the ClimaCon.
10. Maintenance
WARNING
Danger to life due to electric current !
Penetrating liquids can cause electric shocks and
fires.
!
If necessary, clean the surfaces with a soft cloth.
11. Disposal
Directive 2012/19/UE WEEE:
Do not dispose of old devices with normal
domestic waste, but take them to a
designated collection point for the recycling
of electrical and electronic appliances.
22
115500983-V02.01.2022
