background image

Form No. OVMISAM-0321

4

IMPORTANT SAFETY INFORMATION

WARNING

This unit is not intended for use by children or persons 
with reduced physical, sensory, or mental capabilities. 
Ensure proper supervision of children and keep them 
away from the unit.

This unit has no “user-serviceable” parts. If service is 
required on this unit, contact an Authorized Ovention 
Service Agent or contact the Ovention Hotline at 

 

855-298-6836.

CAUTION

BURN HAZARD:
  •  Use caution when removing hot items. Do not allow 

children to use microwave. Failure to follow these 
instructions can result in severe burns.

  •  Some exterior surfaces on unit will get hot. Avoid 

unnecessary contact with unit.

  •  Pan/tray will be very hot upon removal—use oven mitt, 

pan gripper, or other utensil to remove.

Do not use metal utensils OR aluminum foil in oven. Use 
only utensils and materials approved for use in microwave 
ovens.

Do not turn off power switch or unplug unit immediately 
after use. Internal fans must cool oven to avoid damage to 
electrical components.

Locate unit at proper counter height in an area that is 
convenient for use. Location should be level to prevent 
unit or its contents from falling accidentally and strong 
enough to support the weight of the unit and contents.

DO NOT lift unit by door handle on front of oven. Door 
handle is not designed to support weight of unit. Lift from 
underneath unit only.

Do not move or relocate unit for cleaning. Unit is bulky 
and heavy.

Do not place anything on top of unit; doing so may subject 
personnel to injury or could damage unit.

Do not store any materials or items inside oven chamber 
when not in use.

Never use steel pads, wire brushes, or scrapers to clean 
unit.

NOTICE

Do not locate unit in an area subject to ambient 
temperatures above 100°F (38°C). Doing so will damage 
unit and void warranty.

Improper cleaning of oven could damage catalyst and will 
void unit warranty.

Wear protective rubber gloves and protective eye wear 
when cleaning unit. 

Do not cover any part of oven with metal foil. Airflow 
restriction will cause oven to overheat.

Do not lay unit on its side in any direction. Damage to unit 
could occur.

Use non-abrasive cleaners and cloths only. Abrasive 
cleaners and cloths could scratch finish of unit, marring its 
appearance and making it susceptible to soil accumulation.

Clean unit daily to avoid malfunctions and maintain 
sanitary operation.

This unit is intended for commercial use only—NOT for 
household use.

FEDERAL COMMUNICATIONS COMMISSION RADIO 
FREQUENCY INTERFERENCE STATEMENT (U.S.A. ONLY)

This equipment generates and uses ISM frequency energy 
and if not installed and used properly, that is in strict 
accordance with the manufacturer’s instructions, may 
cause interference to radio and television reception. It has 
been type tested and found to comply with limits for ISM 
Equipment pursuant to part 18 of FCC Rules, which are 
designed to provide reasonable protection against such 
interference in a residential installation. 

However, there is no guarantee that interference will not 
occur in a particular installation. If this equipment does 
cause interference to radio or television reception, which 
can be determined by turning the equipment off and on, 
the user is encouraged to try to correct the interference by 
one or more of the following:

  •  Reorient the receiving antenna of the radio or television.

  • Relocate the Microwave Oven with respect to the 

receiver.

  •  Move the microwave oven away from the receiver.

  •  Plug the microwave oven into a different outlet so that 

the microwave oven and the receiver are on different 
branch circuits.

The manufacturer is not responsible for any radio or TV 
interference caused by unauthorized modification to this 
microwave oven. It is the responsibility of the user to 
correct such interference.

Содержание MiSA-a12





































Отзывы: