Form No. OVCM-0720
14
MAINTENANCE
13. Remove the conveyor belt assembly. This step requires
two people.
For single belt models:
a. With one person on each side of the oven cavity, lift
up the conveyor belt assembly and slide the entire
assembly to the right.
b. When most of the conveyor belt assembly is through
the oven cavity, the person on the left should move to
the right side of the oven cavity and continue sliding the
assembly out of the cavity.
Conveyor Belt
Assembly
Lift up until recessed area
clears oven cavity, then
slide out to the right.
Removing the Conveyor Belt Assembly—Single Belt Model
For split belt models (oven door removed):
a. With one person on each side of the oven cavity, lift
up the conveyor belt assembly and slide the entire
assembly out the front of the oven cavity.
Conveyor Belt
Assembly
Removing the Conveyor Belt Assembly—Split Belt Model
14. Clean the conveyor belt assembly.
a. Spray Ovention Oven Cleaner onto both sides of the
conveyor belt assembly. Allow the cleaner to sit for 3–5
minutes.
b. Using a non–abrasive nylon scouring pad, apply
pressure to wipe away grease residue on the conveyor
belt and frame.
c. Spray clean with water and dry using a non-abrasive
cloth. Additional air dry time may be necessary before
reinstallation.
15. Reinstall the conveyor belt assembly, oven door, belt
guard, crumb trays, and conveyor end stops by reversing
the above procedure.
