Oval EX DELTA II, Инструкция по эксплуатации

Страница: 47 / 50

D-583-2N-E
47
18. PRODUCT CODE EXPLANATION
① ② ③ Model
V X S EX DELTA Ⅱ Insertion Type Fixed Type
V X H EX DELTA Ⅱ Insertion Type Hot-tap Type
④ ⑤ ⑥
Probe Nominal Size
0 5 0 50mm (2")
⑦
—
⑧
Fluid category
L Liquid
G Gas
S Saturated Steam
K Heating Steam
⑨
Temp. category
2 Standard (180℃ and lower)
3 High temp. (300℃ and lower)
⑩
Major Parts Material
D SUS304 equivalent
Z Special
⑪ ⑫
Process connection
J 1 JIS10K RF (100mm)
P 1 JPI150 RF (4″)
A 1 ASME150 RF (4″)
Z 9 Special
⑬
—
⑭
Explosion-proof
0 Non-explosionproof
3 Intrinsic safety (TIIS) T4
⑮
Ex-proof temp. class
0 Non-explosionproof
4 T4
⑯
Regulations
0 Standard No applicable law and regulations
G
High Pressure Gas Safety Act
(Approved product)
※w/Material test certificate
H
High Pressure Gas Safety Act
(Individual test)
※w/Material test certificate
(Designed on PO issued)
F w/Material test certificate
⑰ —
⑱ Converter
3 PA35 Battery drive
9 Special
⑲
Converter configuration
1 Integrally mounted
2 Separately mounted (2" pipe mounting)
⑳
Display
1 w/Totalizer · digital indicator ※2
Output
N No external output
Communication interface
N Non
Version code
B Version: B
—
Special
0 Standard
Z When "Special" or "Designed on PO issued" is chosen
※1: Flange type is a special specification except for size 100mm (4").
Flange serration according to ASME standard complies with ASME B 16.5−2003.
※2: By using the external mode switching, any of ① cumulative total flow, ② instantaneous flow rate/h, ③ instantaneous flow rate/min., and ④ resettable total can be displayed.
●
Main code
⑧ − ⑥ ⑤ ④ ③ ② ① ⑯ ⑮ ⑭ − ⑫ ⑪ ⑩ ⑨ − ㉒ ㉑ ⑳ − ㉓ ㉕ ⑲ ⑱
Model
Temp. category
Probe Nominal Size
Fluid category
Converter
Converter configuration
Communication interface
Version code
Special
Output
Display
Regulations
Major Parts Material
Explosion-proof
Process connection
Main code
/ / / Additional code
Ex-proof temp. class