E-216-5N-E
6
4.2 Installation
4.2.1 Installation Location (Indoor only)
Choose to install in the place where:
(1) Mechanical vibration, shock and corrosive gases least
exist.
(2) The air is dry and at around room temperature and stable.
(3) A place not exposed to the direct sunlight.
(4) A place where dust is almost none.
4. INSTALLATION
4.1 Outline Dimensions
(5) Provide a sufficient working space behind the
instrument – at least 50 centimeters from the back panel
of the instrument to facilitate wiring and servicing.
4.2.2 Panel
(1) Use a rigid steel sheet with a minimum thickness of
1.6 mm as min. Recommended thickness is 3.2mm.
(2) If it is required to mount the computers side by side,
dimensions in Fig. 4.2 are suggested.
(3) Recommended mounting height is given in Fig. 4.3.
4.2.3 Installation
(1) Install the ancillary packing on the batch counter and
insert it from the front surface of panel. (Fig. 4.1)
(2) Hook the enclosure hold-down fittings to the slots in
the rear of the enclosure , and confirm that the
instrument is positioned on a level plane, then secure
the instrument to the panel with panel mount
fittings
.
96
96
13
129.1
112
（
17.1
）
□
91
.5
Packing
COM
Unit: mm
Fig. 4.1 Outline Dimensions
Fig. 4.2 Panel Cut
Fig. 4.3 Hight
min.120
min.174
92 0.3
92
0.3
Panel
Batch counter
600
1800
2200
450
Optimum range
Available range
min.120
min.174
92 0.3
92
0.3
Panel
Batch counter
600
1800
2200
450
Optimum range
Available range
Unit: mm
Unit: mm
3.Although the manufacturer guarantees
stated performance at ambient temperatures
from –10 to 50
℃
, it is recommended that
the instrument be placed in service at room
temperature.
NOTE:
2.If chemical solvent etc. may be attached to
the front surface, it is recommended to use
the protection sheet or touch pen separately
to protect the decorative sheet on the front
surface.
1. In installation and through daily operation,
pay due care so as dust not to accumulate
in the place.
