Instruction before assembly
Required Tools: Philip Screwdriver / Adjustable Spanners / Wrenches
Leak Detection Solution: one part detergent and three parts water
Assemble all nuts and bolts loosely at first. Tighten all connections after completion
of assembly. This eases your work
and increases the stability of your appliance.
Before assembly, make sure all packing material and any transmit protection must
be moved.
Small deviations in equipment may occur. This is no lack of quality but subject to
improvements.
1. Line up holes on the bracket of wheel
assembly (M) with
the corresponding holes on base (L), then insert
M8 x 16
mm bolts (BB) through holes. Hand tighten with
M8 flange
nuts (AA). Be sure the wheel assembly (M) is
parallel to
the base (L).
2. Put post (K) on the top of housing (E), put
reinforced ring
(
II) under top of housing (E).Secure post (K) and
reinforced
ring (II) using M6 x 16 mm Bolt and M6 Nut (CC),
lock
washer(JJ), Φ6 Washers (DD). Fasten and cover
with the deck
ring (D).
