3. Attach reflector panels (A) together using M6 x
8mm screws
(FF), Φ6 washers (DD) and cap
nuts (GG).
Secure loosely with cap nuts (GG).
Note: In order to achieve proper alignment of
reflector sections,it may be necessary to loosen
the preassembled bolts prior to assembly and
retighten once complete.
4. Attach reflector plate (B) to reflector panels (A)
using M6 x8mm screws (FF),
Φ
6 washers (DD)
and cap nuts (GG).
Secure loosely with cap nuts (GG).
5. Attach reflector assembly to head assembly
(C).
Secure with cap nuts (GG) and
Φ
6 washers (DD).
Note: Do not over tighten!
Note: Once properly aligned, tighten all screws
and the preassembled bolts.
