Outsunny 842-145, Руководство пользователя

Страница: 7 / 25

B
AA
3
Do NOT tighten the screws until all parts are
installed, it may cause some to not be able to
be connected.
Tighten all screws completely with
screwdriver or wrench (FF) after all parts
are connectd.
1. Attach right front leg (G), right back leg (H)
and 2 left legs (F) to the metal stand (I) using
4 pcs M6 x 15 screws (AA).
Tighten with screwdriver or wrench(FF).
2. Attach the the 2 side panels (E) and front
panel (D) to the legs using 12 pcs M6x15
screws (AA) and 12 pcs M6 nuts (BB).
Tighten with screwdriver and wrench(FF).
Page 7
ASSEMBLY INSTRUCTIONS
Check and ensure all
screws are tightened.
24 pcs of M6 x 15 screws (AA)
E
E
D
AA
BB
. Set the table top (B) upside down on a soft
surface. Turn assembled portion of base from
step 1 & 2 upside down and attach steel base
to the bottom part of the table top (B) using 8
pcs M6 x 15 screws (AA).