Outsight creamsource MICRO, Руководство пользователя

Страница: 17 / 36

15
Chapter 7:
Effects Modes
7.1 nOrMal level
Normal is for using the light as a normal solid light source. Intensity and Colour
Temperature (Bender models only) may be adjusted.
The ON/OFF button can be used to turn the light on or off, and the FLASH button
can be used to create flashes.
SETTING RANGE DESCRIPTION
BRIGHTNESS 0-100% Modeling light output level
COLOUR TEMP 2700k - 6500k Approximate colour temperature
7.2 DUal level
Dual level allows two light levels to be set, one that is switched to ?when the
FLASH button is pressed. This is useful if you need a modeling light level, but then
want to flash brighter for a lightning or strobe effect.
Use the ON/OFF button to turn on or off the modeling light, and FLASH button
to flash up to the Flash Level setting.
SETTING RANGE DESCRIPTION
BRIGHTNESS 0-100% Modeling light output level
FLASH LEVEL 1-50Hz Light output when FLASH button
pressed
COLOUR TEMP 2700k - 6500k Approximate colour temperature
7.3 sTrOBe anD FlasHes
The ON/OFF button can be used to turn the effect on or off, and the FLASH
button can be used to create ‘bursts’ of strobe
SETTING RANGE DESCRIPTION
BRIGHTNESS 0-100% Strobe brightness level
FREQUENCY 1-50Hz Frequency of strobe effect
DUTY CYCLE 1-99% Duty cycle of strobe effect - the ratio
between light OFF and ON times
COLOUR TEMP 2700-6500K Approximate colour temperature
CS_micro_UG_5PRINT.indd 15 11/08/17 1:12 am