Outsight creamsource MICRO, Руководство пользователя

Страница: 23 / 36

21
How to run multiple Creamsources with Flashbandit and no DMX input
1. Link Creamsource together using DMX cable from DMX IN to DMX THRU
connectors on back of unit
2. Plug the FlashBandit into the first unit (the Master)
3. Calibrate the Master unit as normal
4. Set up the desired effect on the Master
5. Set the second/third/fourth units (the Slaves) to ‘Normal’ mode - they will
follow whatever the Master does
As there is communications required between the Master and Slave units, there
will be a delay of around 500uS in synchronisation of the slaves. This may or may
not be noticeable depending on the frame rate and shutter angle of the camera.
Testing is highly recommended!
note if you plug in DMX or remote, then this will override the Master,
and the slaves will no longer be in sync. note also the ‘Timed Flash’
effect will not sychronise between units, however all other effects will.
8.3 slave Multiple Creamsource Units
Multiple Creamsource fixtures can be connected together to operate in unison,
without an external DMX controller. Use DMX cable to connect the units together,
and all units become automatically synchronised.
A DMX breakout cable is required to split out the DMX ports from the Accessories
socket (Part Number CSU-DMX-Y).
A change on one unit (brightness, colour temperature etc.) will be reflected on all
other units. This allows for a bank of Creamsource lights to be operated as if they
were one large source.
To sync special effects modes such as Strobe and Random, the mode should be
set up on one Creamsource unit only, with the other units set to Normal mode.
This Creamsource fixture becomes the Master, and drives the others in sync with
it. Any changes to settings, or using the ON/OFF and FLASH buttons should be
done from this unit.
note: Creamsource Micros, Minis, Doppios and sky’s all work
seamlessly together.
CS_micro_UG_5PRINT.indd 21 11/08/17 1:12 am