background image

Owner & Safety Manual

En-11

D.403.000.V4

OUTLAND LIVING

 FIRE TABLE OWNER & SAFETY MANUAL 

STEP 10: GLASS ROCKS ASSEMBLY 

Open bag of Glass Rocks and arrange neatly and evenly in the 
burner tray. Ensure igniter cover is not covered by glass rocks (see 
photo). This helps air circulate. Take care to keep rocks out of the 
igniter cover. Keep igniter clean of dust. For best flame results 
adjust the rocks to expose the burner tube holes.

Our preferred configuration is pictured here.

SECTION 1:

 ASSEMBLY (continued)

STEP 11 

Your OUTLAND Fire Table is assembled and ready for use.

NOTE: Rocks are not to exceed 4.5kg or 10lbs.

NOTE: Never use a lid or cover to extinguish the flame on your 
Fire Table.

 

 WARNING:

 

Avoid glass dust. Always wear gloves to handle rocks; caution 
for glass dust when handling; use a rag to wipe glass dust. 
Glass dust may result during shipping.

 

 WARNING:

 

Never handle glass rocks which have not been allowed to cool 
from exposure to flame. Never attempt to rearrange rocks 
while unit is ignited.

NOTE TO USER:

Before igniting the unit for the first time, follow steps one 
through 5 in the below Ignition section. 

Содержание FMPPC2E-403

















Отзывы: