background image

Owner & Safety Manual

En-9

D.403.000.V4

OUTLAND LIVING

 FIRE TABLE OWNER & SAFETY MANUAL 

SECTION 1:

 ASSEMBLY (continued)

STEP 5 

Turn fire table upright. Carefully remove 
the (2x) This Way Up Arrow stickers from 
the Propane Cylinder H-Frame Support.

STEP 6 

Cut and remove straps.

CAUTION!

 

Watch for metal crimps. Avoid damaging the 

wicker when removing straps.

CAUTION!

 

Watch for metal crimps located UNDER TABLE 

when removing straps.

METAL 

CRIMP

METAL 
CRIMP

METAL CRIMP

METAL 
CRIMP

SCISSORS

KNIFE

PROPANE CYLINDER
H-FRAME SUPPORT

HEAVY OBJECT. 

TWO PERSON LIFT REQUIRED.

 

 ATTENTION:

 

At this point, if you have purchased the Glass Lid accessory, 
you should install your glass lid mounting brackets now, before 
Step 5. Refer to your glass lid instruction manual for installation 
instructions. Hey, don’t worry if you don’t have your glass lid yet, 
there is still time to order one! Contact information is at the back 
of the manual. For now, proceed with your current installation 
and you can install the necessary parts later. It’s a bit more time 
and effort down the line, but it’ll be worth the investment!

6

Содержание FMPPC2E-403

















Отзывы: