manualshive.com logo in svg

Outlaw 976, Руководство пользователя

Поделиться
Скачать
Outlaw 976 Скачать руководство пользователя страница 38

Outlaw Audio

38

  Engaging EQ

  Listening with Headphones

To engage EQ during playback:

Press the EQ button on the remote.

The front panel will show “EQ ON” for sev-
eral seconds. A momentary mute is normal.

Note: Adjusting the EQ cannot be done 
during playback. To adjust the EQ, you must 
use the on-screen display as described on 
page 31.

To use headphones with the Model 976:

1.

2.

3.

4.

Select the source you want to listen to on 
the Model 976, and turn the volume down 
low, to -30 or -40 dB. 

Plug in your headphones and put them on. 

The main system sound will mute and you 
should hear your selected audio source.

Turn the volume up slowly to a comfortable 
listening level.

Before changing sources, turn the Model 
976’s volume down, then raise it again to a 
comfortable level after the audio is playing. 

The Model 976’s sleep timer automatically shuts 
the unit off  after a predetermined amount of time.

The Model 976 off ers a ten-band equalizer with 
separate adjustments for each channel. Once 
confi gured, this EQ can be engaged or disengaged 
during playback.

  Setting Sleep Timer

The Model 976’s front headphone jack works with 
any standard headphones equipped with a 1/4-inch 
plug, or headphones equipped with a 1/8-inch plug 
and used with a1/4- to 1/8-inch adapter. 

I

MPORTANT NOTE: We strongly recommend you reduce 

the Model 976’s volume to a low setting of -30 to -40 dB 
before you play any material through your headphones, 
then bring the volume up to a comfortable listening 
level. Starting an audio source with the headphone 
level turned up high can result in hearing damage. 

To activate the sleep timer:

1.

2.

Press the the remote control’s “Sleep” 
button. 

The front panel display will show “Sleep” 
and the number of minutes until the 
unit shuts off  immediately after the word 
“Sleep.”

Press the Sleep button repeatedly until 
you’ve chosen the amount of “sleep 
time” you want. 

The available choices are:
0.5HR

→

1.0HR

→

1.5HR

→

2.0HR

→

2.5HR

→

 

3.0HR

→

3.5HR

→

4.0HR

→

OFF

To disengage EQ during playback:

Press the EQ button on the remote.

The front panel will show “EQ OFF” for sev-
eral seconds. A momentary mute is normal.

+

Turn EQ on or off 

Listening with headphones

Enabling sleep timer

+

Содержание 976
















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды