manualshive.com logo in svg

Outlaw 976, Руководство пользователя

Поделиться
Скачать
Outlaw 976 Скачать руководство пользователя страница 30

  

Outlaw Audio

30

DD/DTS Bass Augmentation:

 This mode can en-

hance bass performance during Dolby Digital and 
DTS soundtrack playback. It works only if the front 
speakers are set to Large. In this mode, the signal 
to the front left and right speakers is unaltered, 
but the bass component of that signal is also sent 
to the subwoofer, so you can get enhanced bass 
output. The available choices are:
  

On 

→

 Off 

DPLII/DTS Neo Trim:

 Set from -5dB to +5dB to 

apply an increase or decrease in subwoofer output 
with Dolby Pro Logic II and DTS Neo:6 surround 
processing modes. Default value is 0dB. The avail-
able choices are:
 -5dB 

→

 -4dB 

→

 -3dB 

→

 -2dB 

→

 -1dB 

→

 

0dB 

→

 +1db 

→

 +2dB 

→

 +3dB 

→

 +4db 

→

 +5dB

DPLII/DTS Neo Bass Augmentation: 

This mode 

can enhance bass performance when a Dolby Pro 
Logic II or DTS NEO:6 mode is engaged. It only 
works if the front speakers are set to Large. In this 
mode, the signal to the front left and right speak-
ers is unaltered, but the bass component of that 
signal is also sent to the subwoofer. The available 
choices are: 
  

On 

→

 Off 

Sub Trim:

 Set from -5dB to +5dB to apply an 

increase or decrease in subwoofer output when play-
ing a stereo audio source with small front speakers. 
Default value is 0dB. The available choices are:
 -5dB 

→

 -4dB 

→

 -3dB 

→

 -2dB 

→

 -1dB 

→

 

0dB 

→

 +1db 

→

 +2dB 

→

 +3dB 

→

 +4db 

→

 +5dB

Auto Setup Sub-Menu

A special set-up microphone was provided with your 
Model 976. To use the Automatic Setup routine, plug 
this microphone into the front panel Set-Up Mic jack 
and place the microphone in the preferred listening 
position at approximately ear-level.

The Model 976 will prompt you to verify that the 
setup microphone is plugged in and placed in the 
normal listening position. Press “Continue” to start 
auto setup.

The fi rst step of auto setup is verifi cation of con-
nected speakers. The Model 976 will use a test signal 
to confi rm that all speakers set to either large or small 
in the Speaker Confi g menu. When that is complete, 
it will list each detected speaker and prompt you to 
continue. Press “Continue” to move to the next step.

The second step of auto setup is measuring speaker 
distances and phase settings. The Model 976 will use 
another set of test signals to verify phase and set 
speaker distances. When complete, it will revise any 
speaker distance settings you made in the Speaker 
Distance menu. After this step, the Model 976 will 
report that the auto setup process is complete and 
allow you to return to the Speaker Setup Menu.

Содержание 976
















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды