manualshive.com logo in svg

Outlaw 976, Руководство пользователя

Поделиться
Скачать
Outlaw 976 Скачать руководство пользователя страница 34

  Volume Control

  Muting

Outlaw Audio

34

To adjust the volume level:

Press the VOL + or – button on the remote, 
or turn the VOLUME knob on the front 
panel. The volume level in decibels (dB) 
will be shown on the front panel display as 
seen below.

Minimum volume setting is -90 dB. The 
maximum volume setting may vary 
depending on how you have set the levels 
of the individual channels. Setting trims to 
higher than 0 dB may reduce the maximum 
volume setting.

Use this control to turn the sound off  
momentarily.

1.

2.

Press the MUTE button on the remote 
control or the front panel. 

The sound will be muted and the front 
panel display will read MUTE ON, as seen 
below:

Press either MUTE button again to re-
store the volume to its previous level.

The SURR MODE control activates the Model 976’s 
matrix surround sound modes, and changes the 
surround mode from the one currently selected. 
The modes available will depend on whether the 
incoming signal is stereo or 5.1/6.1/7.1, and what 
speaker confi guration you are using. If you are 
unsure about which mode you want to use, refer to 
the Audio Formats and Listening Modes section of 
this manual (pages 13 and 15).

If the Model 976 is receiving a stereo (2-channel) 
signal and you are using a 5.1 or 7.1 speaker setup, 
you will be able to choose among these modes:

Dolby Pro Logic II Movie 

→

 

Dolby Pro Logic II Music 

→

 Dolby Pro Logic II Game 

→

 DTS NEO:6 Cinema 

→

 

DTS NEO:6 Music 

→

 All Channel Stereo. 

If you are using a 7.1 speaker setup, Pro Logic IIx will 
be employed instead of Pro Logic II.

Use this control to adjust the volume level of all 
currently connected speakers.

  Changing the Surround Mode

Increasing or decreasing the 
volume level

Front Panel Display

Turning Mute on and off 

Front Panel Display

To activate available surround modes

or

or

or

o

o

Содержание 976
















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды