12
13
MAINTENANCE AND STORAGE
TROUBLE SHOOTING
DISASSEMBLY
1. Remove all the accessories from the kayak: oars, repair-kit….
3. Fold the kayak (make sure that the kayak is clean and dry. See the above Maintenance
& Storage chapter).
4. Put kayak and air pump, oars into carry bag for storage.
When you find the boat appears a bit soft, it might not definitely be because of a leak.
Firstly you can check if valve caps are loose. If all valves are in good condition, you can
temperature, say, 35 º C (95 º F), and air might cool down to 25 º C (7 7 º F) overnight,
so that the pressure on the hull may lower down, and the boat will appear soft the next
morning.
If valves and temperature variation are not the reasons, you need to start looking for a leak:
closely check over the outside. Any large leaks should be clearly visible.
2.Pinpoint the location of the leak: spry mild soapy water over the suspicious areas. Any
leak will produce bubbles.
3.Check valves system for leak.
Depending on the parts usage, keep some spare available, all parts suggest must consult
local agent for factory authorized parts when servicing system.
Clean your kayak after a trip to prevent damage from sand, salt water or sun exposure.
Use a garden hose washing the kayak and a sponge and mild soap can clean most dirt.
Make sure the kayak is completely clean and dry before storing, otherwise the kayak will be
mouldy.
Do not use solvents to clean the kayak, solvents may damage material or plastic
components in system. Store all kayak accessories in a dry storage location with ventilation.
Make sure that all parts are dry before storage.
· Choose a dry and cool place to store the kayak.
· Don’t hang the kayak up.
· Don’t place any heavy or sharp objects on it.
The kayak is designed to be storable, seasonal kayak. If you live in a temperate area in
which the kayak will not be in use all year-round, it is STRONGLY RECOMMENDED to
This will help extend your kayak and prevent a safety hazard from developing while the
kayak is not in use.
REPAIRS
Little holes or puncture can be repaired with the repair kit come along with the boat.
1. Find the leak.
2. Thoroughly clean the area surrounding the leak to remove any dirt or grime.
3. Cut a piece of repair material in round shape, which should be larger than the damaged
area.
4. Using a piece of the repair kit, trace outline of the patch lightly.
5. Apply adhesive to the underneath side of the patch and around the area to be repaired.
Coat the affected are lightly but completely with glue.(not included in the product, please
purchase separately from your market.)
7. Allow 12 hours for repair to dry. After patch has dried, apply glue around the edges for a
complete seal (dry 4 hours).
(adhesive not included)
Warning:
Certain household cleaning solvents, chemicals and other liquids (such as battery acid, oil
and petrol) could damage the PVS fabric. In the event of spill or mishandling, you should
check for leaks and inspect for structural integrity.
8. Using the self adhesive patch from the repair kit, peel back and stick onto the damaged area
and press down firmly.
