25
Outdoor Lifestyles by Hearth & Home Technologies • Palazzo Installation Manual • 4082-311 Rev. A • 06/08/15
8
Appliance Setup
A. Remove the Shipping Materials
Remove shipping materials from inside the firebox and
remove the blue plastic coating from the firebox.
WARNING! Risk of Fire! Close the ball valve before in-
stalling the splatter guard to prevent accidental lighting.
Remove the splatter guard before lighting the appliance.
D. Verify Pilot Shield
Ensure proper placement of the pilot shield and media
placement template, See Figure 8.1. Shipping could
cause then to become displaced.
Figure 8.2 Media Placement Template (removal)
Figure 8.3 Glass wind Guard
B. Clean the Appliance
Clean/vacuum any sawdust that may have accumulated
inside the firebox.
C. Optional Accessories
Install approved accessories per instructions included
with accessories. Contact your dealer for a list of ap-
proved accessories.
WARNING! Risk of Fire and Electric Shock! Use ONLY
Hearth & Home Technologies-approved optional acces-
sories with this appliance. Using non-listed accessories
could result in a safety hazard and will void the warranty.
Figure 8.1 Media Placement Template
E. Install Clear Crystal Media
Pour crystal media into the hearth area. Cover the hearth
pan evenly.
F. Remove Media Placement Template
Remove screw attaching the media placement template
and remove. See Figure 8.2. Do not discard template.
G. Glass wind Guard
Remove wind guard packaging. Carefully place wind-
shields into glass channels provided. See Figure 8.3.
Windshield fits
into glass
channel
Media
Placement
Template
Media
Placement
Template