21
Outdoor Lifestyles by Hearth & Home Technologies • Palazzo Installation Manual • 4082-311 Rev. A • 06/08/15
E. High Altitude Installations
NOTICE: If the heating value of the gas has been reduced,
these rules do not apply. Check with your local gas utility
or authorities having jurisdiction.
When installing above 2000 feet elevation:
• In the USA: Reduce input rate 4% for each 1000 feet
above 2000 feet.
• In CANADA: Input ratings are certified without a
reduction of input rate for elevations up to 4500 feet
(1370 m)above sea level. Please consult provincial and/
or local authorities having jurisdiction for installations at
elevations above 4500 feet (1370 m).
Check with your local gas utility to determine proper
orifice size. See conversion kit for instructions on how to
change main burner orifice. (#LPK-ODPALG-48)
• Remove screws securing control box upper access
panel.
• Remove control box upper access panel.
See Figure 6.6.
After finishing:
Once finishing materials are added to the face of the ap-
pliance, the control box and controls
MUST
be accessed
through the firebox.
• Make sure unit is off and cool.
• Remove media from hearth pan.
• Remove screws securing hearth pan to firebox bottom.
• Lift and remove hearth pan, set aside. See Figure 6.4.
Hearth Pan
Figure 6.4 Hearth Pan
• Remove screws securing burner and pilot.
• Slide burner to the right to disengage orifice.
• Lift and remove burner, set aside. See Figure 6.5.
Burner
Assembly
Figure 6.5 Burner Assembly
Control Box
Upper Access
Panel
Figure 6.6 Upper Access Panel
