Outdoor GreatRoom Company Denali DENBR-1242 Скачать руководство пользователя

Страница: 6 / 12

outdoorrooms.com

IMPORTANT

B. BURNER INSTALLATION

Please consult your Crystal Fire Plus® instruction manual for detailed instruc-

tions and important information related to the burner installation including:

lighting and operating instructions, safety information, and proper tightening

of connections with two wrenches.

DO NOT ATTEMPT TO INSTALL CRYSTAL FIRE

PLUS BURNER WITHOUT

FIRST CONSULTING THE CRYSTAL FIRE

PLUS OWNER’S MANUAL.

•

Burner is comes fully installed within fire table. Refer to page 4 about leak

checks and retightening connections.

ATTENTION

TIGHTEN ALL CONNECTIONS

SECURELY WITH TWO WRENCHES

C. CF-SPARKER VERIFICATION

•

Test system by pushing the button on

the igniter. Consult the troubleshooting

section of the Crystal Fire® Plus owner’s

manual if the spark is weak, intermittent

or not present. Image 3.2

ATTENTION

Refer to the Crystal Fire manual included with your burner for more

detailed information on operation, maintenance, and safety of your burner.

Image 3.2

Содержание Denali DENBR-1242













Результаты поиска

Содержание Denali DENBR-1242

Отзывы:

Похожие инструкции для Denali DENBR-1242

Бренды по названию

Популярные бренды

Outdoor GreatRoom Company Denali DENBR-1242, Руководство по установке

Результаты поиска

Содержание Denali DENBR-1242

Отзывы:

Похожие инструкции для Denali DENBR-1242

Бренды по названию

Популярные бренды