5
4
b. Solar Panel
Our engineers have designed this camera to function with most standard 12V/1~2A built in lithium battery solar
panels. However, as rechargeable AA NiMH batteries need a higher voltage for charging, the solar panel cannot
charge the batteries in the camera.
c. Power Adaptor—Security Surveillance Purpose
This camera can also be powered by an external 12V/ 1~2A DC adapter. Remove the AA batteries when the power
adapter is used.
1.2 SD Card Selection
A memory card is required to operate the camera. When the camera is “ON” and no memory card is used, the screen
displays “Pls insert memory card”. The SD slot of the camera has a 32 GB memory capacity. Before inserting or
removing the memory card, the camera must be turned “OFF”. Failing to do so may cause loss of or damage of the
pictures already recorded from the memory card. When the SD card is full, the viewing screen indicates “Memory Full”.
The following data shows an approximate quantity of photos which can be recorded by the camera depending on the
memory card capacity.
The Chart below will show you the approximate capacity of different size SD cards. Please check to see which size card
can fit your needs best.
4 GB
8 GB
16 GB
32 GB
Photo (pictures)
5MP
3585
7492
15307
30936
8 MP
2294
4798
9794
19795
12 MP
1613
3371
6887
13919
Video (hours)
640x480
00:22:28
00:46:57
01:35:56
03:13:52
HD
00:16:13
00:33:53
01:09:14
02:19:56
FHD
00:08:31
00:17:48
00:36:20
01:13:21
1.3 USB Connection - PC Camera
When the camera is connected via the USB cable; screen display “MSDC”, press “Menu” once, “MSDC” turns to “PC Cam”,
camera now can be used as a PC camera; press “Menu” again, camera exits PC camera mode.
1.4 Attention
1. Insert the SD memory card correctly. The camera must be turned off to have the SD card inserted or removed.
2. Please use high-quality AA batteries to prevent battery leaks. Remove batteries when the camera is not in use.
Battery leaks are not covered under Warranty. Do not put batteries in the wrong way around.as it can damage
the camera.
3. Ensure you use the correct adaptor (12V/1A or 2A )if you use a power supply.
4. In Test mode, the camera will automatically enter PIR Auto mode if there are no buttons pressed within 60 sec.
Please manually turn ON as if you want to do further configuration.
5. Don’t interrupt the power supply during system upgrade, please return it back to Outdoor Cameras Australia if the
device doesn’t work after upgrading.
6. Do not frequently insert or pull out SD card and battery or plug in and out the adaptor when the camera is on.
7. Do not have any floating objects, such as leaves, grass, strings, or ribbons in the motion detection zone of cameras.
8. Do not keep camera next to hot irrelevant objects, air conditioner exhaust vents, and light, etc. to avoid mistaking
photos or videos.
9. The wide angle camera model has a 100° FOV lens which means more flash is needed to get better night time
images than the average 52° FOV lens; that’s why the 56pcs 60° IR LEDs are used on this camera. To ensure these
56pcs IR LEDs can give enough flash for the wide angle lens high quality AA batteries must be used to deliver
enough amperage to power the illuminator consistently in dark environments.
10. Programmed Date/Time can be saved in the camera for 12 hours.
1.5 Key Features
1. 0.35 seconds
trigger speed;
2. Wide lens model: 100 degree FOV lens; 110 degree PIR angle;
3. Regular lens model: 52 degree FOV lens; 52 degree PIR angle;
4. 12MP/ 1080P@30FPS;
5. Programmable 5/8/12 Megapixel high-quality resolution;
6. 56pcs invisible IR LEDs
, offer 15 metres (50 feet) real night vision distance;
7. Crystal clear day & night photo/video quality;
8. 1 photos burst within 1 second
;
9. Support multiple functions: adjustable PIR sensitivity, Multi-shot (1~5 photos per trigger), programmable delay
between motions, Time Lapse, Timer, Audio Recording, TV out, stamp of (camera ID, date/time, temperature,
moon phase) on every single photo;
10. Available operation temperature: -30°C to 60°C;
11. Built-in 2.0” TFT colour screen;
SD
Size
Capacity
